The Moving Coil Galvanometer (MCG)

Explore the radial magnetic field, deflecting torque $\tau = NIAB$, phosphor-bronze hairspring restoring torque $\tau = k\phi$, and conversion into an Ammeter (Shunt $r_s$) and Voltmeter (Series Multiplier $R$).

Laboratory Investigation Mode

1. Coil Current (I)

+25.0 µA

2. Construction Parameters (N, B, A)

100 turns
0.25 T
6.0 cm²

3. Restoring Hairspring Torsion (k)

25.0 ×10⁻⁹ N·m/deg

4. Core, Pole Geometry & Damping Experiments

Physical Insight: Concave pole shoes + soft-iron core ensure $\mathbf{B}$ is strictly radial ($\sin\theta = 1$ always). Eddy currents in the metallic frame damp oscillations critically (dead-beat motion). Removing the core widens the air gap; this lab assumes $B$ then falls to $0.4$ of its value (the real drop depends on the magnet).

1. Desired Ammeter Full-Scale Range (Imax)

3.0 A

2. Circuit Line Current (I)

+1.80 A

3. Galvanometer Internal Specs

50.0 Ω
50.0 µA
Required Shunt Formula: $$r_s = \frac{I_g R_g}{I_{\text{max}} - I_g}$$

Shunt $r_s = 0.833\text{ m}\Omega$ bypasses $99.998\%$ of circuit current, protecting the delicate coil.

1. Desired Voltmeter Full-Scale Range (Vmax)

20.0 V

2. Test Voltage Input (V)

+12.0 V

3. Galvanometer Internal Specs

50.0 Ω
50.0 µA
Required Multiplier Formula: $$R = \frac{V_{\text{max}}}{I_g} - R_g$$

Series $R = 399.95\text{ k}\Omega$ limits current draw to $< 50\ \mu\text{A}$, avoiding circuit loading errors.

Physics Concepts: Moving Coil Galvanometer (MCG)

  • Radial Magnetic Field: Cylindrical concave pole pieces combined with a coaxial soft-iron core ensure magnetic field lines are always parallel to the plane of the coil (normal $\mathbf{m}$ is perpendicular to $\mathbf{B}$, so $\sin\theta = 1$).
  • Constant Deflecting Torque: $\tau = NIAB\sin 90^\circ = NIAB$ throughout rotation.
  • Restoring Hairspring Torque: Opposed by phosphor-bronze spring: $\tau_{\text{restoring}} = k\phi$.
  • Linear Scale Condition: Equating torques gives $\phi = \left(\frac{NAB}{k}\right)I$, producing a strictly linear scale.
  • Current Sensitivity: $S_i = \frac{\phi}{I} = \frac{NAB}{k}$ (scale divisions per microampere).
  • Voltage Sensitivity: $S_v = \frac{\phi}{V} = \frac{NAB}{k R_g} = \frac{S_i}{R_g}$ (divisions per millivolt).
DEFLECTION φ: +15.0 div
TORQUE τ: 3.75 ×10⁻⁷ N·m
CURRENT SENS: 0.60 div/µA
VOLTAGE SENS: 12.0 div/mV
STATUS: READY • BALANCED EQUILIBRIUM
Scale Calibration & Sensitivity Telemetry
φ = (NAB / k) I
Operating Point
Predict • Observe • Explain

Why must the magnetic field in a Moving Coil Galvanometer be strictly radial?

If the concave cylindrical pole pieces and soft-iron core were replaced with flat, parallel pole pieces, what would happen to the scale graduation and deflecting torque?

About this series

Physics is best learned through exploration, experimentation, and visualization.

Developed by Dr. Ajith S Kumar, Department of Physics, D B Pampa College, Parumala, this collection brings Plus Two (Class 11 & 12) physics to life through interactive simulations. Each simulation is carefully designed around the concepts students find most challenging, helping learners develop a deeper understanding rather than simply memorize formulas. Aligned with the Kerala Higher Secondary (SCERT) and NCERT syllabus, it is open to every student, teacher, and physics enthusiast.