Semiconductor Diode Bias & V-I Characteristics

Examine the asymmetric, non-linear conduction of a $p\text{-}n$ junction diode across forward and reverse bias. Observe barrier height modulation, depletion layer thinning, threshold knee conduction, minority saturation drift ($I_s$), dynamic resistance ($r_d = \Delta V / \Delta I$), and reverse breakdown.

Diode Voltage ($V_D$): +0.72 V
Diode Current ($I_D$): 12.8 mA
Dynamic Resistance ($r_d$): 3.2 Ω
Effective Barrier ($V_{\text{eff}}$): 0.00 V (Lowered)
Dynamic Conduction Parameters: rd and Depletion Width W Shockley Law: Id = Is [exp(Vd / ηVT) - 1]
Predict • Observe • Explain

Why is Germanium's cut-in knee voltage ($\approx 0.2\,\text{V}$) lower than Silicon's ($\approx 0.7\,\text{V}$)?

When comparing a Silicon diode with a Germanium diode under forward bias, Germanium begins to conduct significant current at only $\approx 0.2\,\text{V}$, whereas Silicon requires $\approx 0.7\,\text{V}$. What physical property governs this threshold difference?

Theoretical Principles & Mathematical Formulations

⚡

1. Forward Bias Mechanism & Barrier Lowering

When an external DC voltage is applied with the positive terminal connected to the $p$-type semiconductor and the negative terminal to the $n$-type semiconductor:

  • The externally applied electric field $\mathbf{E}_{\text{ext}}$ points from $p \to n$, directly opposing the built-in field $\mathbf{E}_{\text{built-in}}$ ($n \to p$).
  • The net effective barrier potential is reduced from $V_0$ to $(V_0 - V)$.
  • The depletion layer width contracts according to:
$$W(V) = W_0 \sqrt{1 - \frac{V}{V_0}}$$

Once $V$ approaches the cut-in knee $V_{\text{knee}}$, majority carriers easily overcome the lowered barrier, resulting in an exponential surge of diffusion current. The voltage across the junction itself never quite reaches $V_0$: once the current is large, the extra applied voltage drops across the bulk resistance of the $p$- and $n$-regions, so a small barrier and a thin depletion layer remain (this simulation keeps $V_{\text{eff}} \ge 0.12\,\text{V}$, with a bulk resistance $R_s = 2.5\,\Omega$).

🛡️

2. Reverse Bias & Thermal Saturation Current

When the polarity is reversed ($p$-side negative, $n$-side positive):

  • The external field reinforces the internal built-in field, driving majority carriers further away from the metallurgical junction.
  • The effective barrier increases to $(V_0 + |V|)$, and the depletion layer thickens:
$$W(V) = W_0 \sqrt{1 + \frac{|V|}{V_0}}$$

Majority carrier diffusion is entirely suppressed. The only current flowing is a microscopic drift of thermally generated minority carriers (electrons in $p$, holes in $n$), yielding a constant reverse saturation current $I_s$ independent of voltage until breakdown.

📊

3. The Shockley Ideal Diode Equation

The total current flowing through a semiconductor diode under any applied bias voltage $V$ is governed by the Shockley relation:

$$I(V) = I_s \left[\exp\left(\frac{q V}{\eta k_B T}\right) - 1\right] = I_s \left[\exp\left(\frac{V}{\eta V_T}\right) - 1\right]$$
  • $I_s$: Reverse saturation current, proportional to $T^3 \exp(-E_g / k_B T)$.
  • $V_T = k_B T / q$: Thermal voltage ($\approx 25.86\,\text{mV}$ at $300\,\text{K}$).
  • $\eta$: Ideality factor ($\eta \approx 1$ for Ge, $\eta \approx 1.5\text{--}2$ for Si due to recombination in the depletion layer).
🎯

4. Threshold Knee Voltage Across Semiconductors

The cut-in voltage ($V_{\text{knee}}$) represents the applied forward voltage required to neutralize the built-in potential barrier. It scales directly with the forbidden energy band gap $E_g$:

  • Germanium ($\text{Ge}$): $E_g \approx 0.67\,\text{eV} \implies V_{\text{knee}} \approx \mathbf{0.2\,\text{V}}$.
  • Silicon ($\text{Si}$): $E_g \approx 1.10\,\text{eV} \implies V_{\text{knee}} \approx \mathbf{0.7\,\text{V}}$.
  • Gallium Arsenide ($\text{GaAs}$): $E_g \approx 1.42\,\text{eV} \implies V_{\text{knee}} \approx \mathbf{1.2\text{--}1.5\,\text{V}}$ (LED materials).

Below $V_{\text{knee}}$, current is negligible ($< 0.1\,\text{mA}$). Above $V_{\text{knee}}$, current rises almost vertically with slope determined by dynamic resistance.

💥

5. Reverse Breakdown: Zener vs. Avalanche

When high reverse voltage is applied ($V \le -V_{\text{br}}$), the diode abruptly conducts heavy current via two distinct microscopic mechanisms:

  • Zener Breakdown ($V_{\text{br}} < 6\,\text{V}$): Occurs in heavily doped diodes with an extremely narrow depletion layer ($W < 10\,\text{nm}$). The electric field exceeds $\sim 10^6\,\text{V/cm}$, pulling valence electrons directly into the conduction band via quantum tunneling.
  • Avalanche Breakdown ($V_{\text{br}} > 6\,\text{V}$): Occurs in lightly doped diodes with wider depletion layers. Thermally generated minority carriers accelerate to high kinetic energy, knocking valence electrons free via impact ionization, sparking a carrier multiplication cascade. Beyond $V_{\text{br}}$, the junction clamps voltage with a low dynamic breakdown impedance ($r_z \approx 8\,\Omega$).
📈

6. Dynamic (AC) vs. Static (DC) Resistance

Because the diode is a non-linear, non-ohmic device ($V/I \ne \text{constant}$), two different resistances are defined at an operating point $Q(V_Q, I_Q)$:

$$R_{\text{dc}} = \frac{V_Q}{I_Q}, \qquad r_d = \frac{\Delta V}{\Delta I} = \left(\frac{dI}{dV}\right)^{-1} = \frac{\eta V_T}{I_Q + I_s} + R_s$$
  • Static Resistance ($R_{\text{dc}}$): Resistance to pure direct current, equal to the reciprocal slope of the chord connecting the origin to $Q$.
  • Dynamic Resistance ($r_d$): Small-signal resistance to AC variations, equal to the reciprocal of the tangent slope at $Q$. In forward conduction ($I_Q = 10\,\text{mA}$), $r_d$ is only a few ohms (for $\eta = 2$, $\eta V_T / I_Q \approx 5\,\Omega$, plus the bulk series resistance $R_s = 2.5\,\Omega$ used here), while in reverse bias it is megaohms or more.

About this series

Physics is best learned through exploration, experimentation, and visualization.

Developed by Dr. Ajith S Kumar, Department of Physics, D B Pampa College, Parumala, this collection brings Plus Two (Class 11 & 12) physics to life through interactive simulations. Each simulation is carefully designed around the concepts students find most challenging, helping learners develop a deeper understanding rather than simply memorize formulas. Aligned with the Kerala Higher Secondary (SCERT) and NCERT syllabus, it is open to every student, teacher, and physics enthusiast.