Energy Bands & Intrinsic-Extrinsic Semiconductors

Explore how quantum mechanical band splitting in periodic crystal lattices governs electrical conductivity. Witness thermal bond ruptures in pure Silicon, manipulate donor and acceptor dopants, and verify the invariant Law of Mass Action ($n_e \cdot n_h = n_i^2$) and overall crystal charge neutrality.

Temperature ($T$) 300 K (25.9 meV)
Energy Band Gap ($E_g$) 1.10 eV (Indirect)
Electrons ($n_e$) 1.50 × 10¹⁰ cm⁻³
Holes ($n_h$) 1.50 × 10¹⁰ cm⁻³
Fermi-Dirac Distribution & Density of States Profile Thermal Equilibrium
Predict • Observe • Explain

Net Electric Charge of an n-Type Semiconductor

If a pure tetravalent Silicon crystal is heavily doped with pentavalent Arsenic ($\text{As}$) donor atoms to create an $n$-type semiconductor where electrons outnumber holes by millions of times, what is the net electric charge of the doped crystal?

Fundamental Principles of Semiconductor Physics

Complete mathematical foundations, quantum energy band derivations, covalent lattice dynamics, and the physical laws governing solid-state electronics.

⚛️

1. Origin of Energy Bands in Solids

In an isolated single atom, electrons occupy sharp, discrete energy levels determined by quantum numbers ($n, l, m, s$). When $N \sim 10^{23}$ atoms assemble into a periodic crystal lattice (interatomic spacing $a \sim 0.2\text{--}0.3\,\text{nm}$):

  • Outer valence electron wavefunctions overlap strongly with neighboring atomic potentials.
  • By the Pauli Exclusion Principle, no two electrons can occupy the identical quantum state; each discrete energy level splits into $N$ infinitesimally closely spaced states ($\Delta E \sim 10^{-23}\,\text{eV}$).
  • These $N$ split states merge into continuous energy bands. The highest fully or partially filled band at $0\,\text{K}$ is the Valence Band (VB), and the next allowed empty band is the Conduction Band (CB).
⚡

2. Classification by Band Gap ($E_g$)

The forbidden energy gap ($E_g = E_c - E_v$) dictates whether electrons can gain kinetic energy from an applied electric field:

$$\begin{aligned} \text{Conductors:}& \quad E_g = 0 \quad (\text{VB & CB overlap, } \sigma \sim 10^2\text{--}10^8\,\text{S/m}) \\ \text{Semiconductors:}& \quad 0 < E_g < 3\,\text{eV} \quad (\text{Si: } 1.1\,\text{eV}, \text{Ge: } 0.7\,\text{eV}) \\ \text{Insulators:}& \quad E_g > 3\,\text{eV} \quad (\text{Diamond: } 5.4\,\text{eV}, \rho > 10^{11}\,\Omega\cdot\text{m}) \end{aligned}$$

At $T = 0\,\text{K}$, semiconductors have zero electrons in the conduction band and behave as perfect insulators. At room temperature ($300\,\text{K}$, $k_B T \approx 0.026\,\text{eV}$), thermal excitation promotes electrons into the conduction band.

🌡️

3. Intrinsic Carrier Concentration ($n_i$)

In an ultra-pure semiconductor, thermal lattice vibrations randomly rupture covalent bonds, simultaneously creating a free conduction electron and a vacancy in the valence band (hole):

$$n_e = n_h = n_i(T) = A \cdot T^{3/2} \exp\left(-\frac{E_g}{2 k_B T}\right)$$

Total intrinsic current density under electric field $\mathcal{E}$ is the sum of electron and hole drift currents:

$$J_{\text{tot}} = J_e + J_h = e \left(n_e \mu_e + n_h \mu_h\right) \mathcal{E} = e n_i \left(\mu_e + \mu_h\right) \mathcal{E}$$

Because holes move via sequential electron hops between localized covalent bonds, hole mobility is always lower than electron mobility ($\mu_h \approx 480\,\text{cm}^2/\text{V}\cdot\text{s} < \mu_e \approx 1350\,\text{cm}^2/\text{V}\cdot\text{s}$ in Silicon).

🔋

4. n-Type Doping & Donor Level ($E_d$)

Doping Silicon with pentavalent atoms ($\text{P}, \text{As}, \text{Sb}$ with 5 valence electrons) provides an abundance of conduction electrons:

  • Four electrons form covalent bonds with adjacent Si atoms; the fifth electron is weakly bound ($E_b \approx 0.05\,\text{eV}$ in Si).
  • This fifth electron occupies an energy level $E_d$ located just below $E_c$ ($E_c - E_d \approx 0.05\,\text{eV}$).
  • At room temperature, thermal energy ($0.026\,\text{eV}$) ionizes almost 100% of donors: $$n_e \approx N_d \quad (\text{Majority Carriers}), \quad n_h = \frac{n_i^2}{N_d} \ll n_e \quad (\text{Minority Carriers})$$
🕳️

5. p-Type Doping & Acceptor Level ($E_a$)

Doping Silicon with trivalent atoms ($\text{B}, \text{Al}, \text{In}$ with 3 valence electrons) creates an abundance of mobile holes:

  • Three electrons complete covalent bonds with three neighbors, leaving the fourth bond vacant.
  • An electron from an adjacent bond hops into this vacancy with very little energy ($0.01\text{--}0.05\,\text{eV}$), creating a free hole in the valence band.
  • The acceptor level $E_a$ sits just above $E_v$ ($E_a - E_v \approx 0.05\,\text{eV}$), leading to: $$n_h \approx N_a \quad (\text{Majority Carriers}), \quad n_e = \frac{n_i^2}{N_a} \ll n_h \quad (\text{Minority Carriers})$$
⚖️

6. The Law of Mass Action & Neutrality

In thermal equilibrium, the rate of carrier generation ($G_{\text{thermal}}$) equals the rate of recombination ($R \propto n_e \cdot n_h$), establishing the invariant Law of Mass Action:

$$n_e \cdot n_h = n_i^2(T) = \text{constant at temperature } T$$

Crucially, doped crystals remain strictly electrically neutral ($Q_{\text{net}} \equiv 0$). Every mobile electron or hole is matched by a fixed, opposite ion core:

$$n_e + N_a^- = n_h + N_d^+ \implies \rho_{\text{net}} = e(n_h - n_e + N_d^+ - N_a^-) \equiv 0$$

About this series

Physics is best learned through exploration, experimentation, and visualization.

Developed by Dr. Ajith S Kumar, Department of Physics, D B Pampa College, Parumala, this collection brings Plus Two (Class 11 & 12) physics to life through interactive simulations. Each simulation is carefully designed around the concepts students find most challenging, helping learners develop a deeper understanding rather than simply memorize formulas. Aligned with the Kerala Higher Secondary (SCERT) and NCERT syllabus, it is open to every student, teacher, and physics enthusiast.